MinimServer2 - Transcription does not to work

[simoncn]

To set the ohnet.subnet property, use the following commands:

select watch
prop ohnet.subnet=192.168.0.0
props

The final props command is just to confim that ohnet.subnet has been set correctly. Now exit MinimWatch and restart it. If you have a network adapter that is configured with subnet 192.168.0.0, MinimWatch should select this adapter and subnet and should find MinimServer. You should see output like this:

Selected media server: MinimServer[myNAS]
MinimServer[myNAS] is running

You can now use the props command to see the current settings of all MinimServer properties. You can also use the profile show command to see the settings for the active profile.