invisible minimserver

[lyapounov]

(24-10-2020 14:39)simoncn Wrote:  The file attached to this post (minimwatch.log.zip) contained a file minimwatch.log which was a MinimWatch log file (I have just double-checked this again).

My apologies for missing the important point that you couldn't follow all the instructions without MinimWatch being working (catch 22). To set these debug options on MinimServer without using MinimWatch, you can do the following:

1) Open the MinimServer configuration web page
2) On the Profiles tab, select Export and export your active profile
3) Edit the profile file using a text editor to add the following two lines exactly as shown:

Code:

.logLevel = debug
ohnet.debug = All

4) Save the edited file as a plain text file named test.profile
5) On the Profiles tab, select Import and import the test.profile file
6) On the Profiles tab, use the Select tab to make the test profile active

You are now all set to run the test:

1) Exit MinimWatch
2) Relaunch MinimWatch and wait for 2 minutes
3) Copy the minimserver.log file from the Synology MinimServer/appData folder to another safe location
4) Compress this file to save space and attach it to a post here

Many thanks for your help with this!

I saw the catch 22
And i guessed the method. I just wasn't sure of what to add, so thx Simon

Now, the zip is too large, so you can download it here:
https://www.soudoplatoff.org/div/minimserver.log.zip

Cheers
Serge