Minimwatch cannot see Minimserver

[macrotech]

(09-03-2017 23:47)simoncn Wrote:  Do you have a firewall running on the TS112? If so, try disabling this firewall or adding an exception for MinimServer.

Nope, no firewall. Nothing on the QNap has changed. The only change is replacing the BT Home Hub 5 with a Home Hub 6, and using exactly the same IP and DHCP settings on both the old and new hubs.

The same PC can see a different MinimServer on a different network at a different physical location via MinimWatch, so MinimWatch is working on the PC.