Cannot open a status webpage to add content - Synology

[rayge]

(15-06-2015 14:59)rayge Wrote:  

(15-06-2015 14:31)simoncn Wrote:  

(15-06-2015 14:15)rayge Wrote:  192.168.1.9 is the IP address reported by Synology Control Panel's Info Network page and the wired IP address assigned to it according to my Netgear R7000 router. I also configured port forwarding to add 9790 TCP/UDP to 192.168.1.9 (although I don't really know what I'm doing, or if that's necessary).

The address of my wireless laptop is:
IPv4 Address: 192.168.1.7
IPv4 Subnet Mask: 255.255.255.0 (same subnet).

I'm not sure what to look for in my windows firewall settings. I opened up "Windows Firewall with Advanced Security", clicked on "Outbound Rules" and sorted the Local and Remote Ports columns and 9790 was not listed. I turned off Windows Firewall for local and public networks, clicked on MinimServer again from the Main Menu which opened up the 192.168.1.9:9790 webpage again and still got "This webpage is not available."

This is quite a puzzle. It sounds like all your setup is correct and I haven't seen this problem before.

Do you have a firewall running on the Synology that mght be blocking inbound connections to port 9790? You can check this by going to Control Panel > Security > Firewall. My settings are the defaults: Ports = All, Source IP = All, Action = Allow.

H'mmm, I've attached snapshots of my LAN and All Interfaces from the Control Panel > Security > Firewall settings.

Well, !thank you! , that was my issue. I added MinimServer to the LAN (see attached) and I can now access the status page.