Threaded Mode | Linear Mode

beckphotonik · (This post was last modified: 30-01-2020 20:56 by beckphotonik.)

(30-01-2020 20:37)simoncn Wrote: The problem is the {} around the path. You can edit the contentDir field in MinimWatch to remove these.

It seems you have changed the contentDir setting from the default. The default is /mnt/disk1/share and also includes two expansion drives /mnt/expansion1 and /mnt/expansion2. How did you make this change? This information should enable me to work out where the {} came from.

The {} are inserted by your code, they are NOT in the path as entered by me. see attached

beckphotonik · 30-01-2020, 22:05

(30-01-2020 20:43)beckphotonik Wrote:
(30-01-2020 20:37)simoncn Wrote: The problem is the {} around the path. You can edit the contentDir field in MinimWatch to remove these.

It seems you have changed the contentDir setting from the default. The default is /mnt/disk1/share and also includes two expansion drives /mnt/expansion1 and /mnt/expansion2. How did you make this change? This information should enable me to work out where the {} came from.
The {} are inserted by your code, they are NOT in the path as entered by me. see attached

Simon, if I have only one contentDir then all becomes fine. The problem appears to be multiple contentDirs.

Hope that helps

simoncn · 30-01-2020, 23:38

I have tried this on my N1 with 3.92b and multiple content directories. Everything works as expected and I don't see the error message. I will do some further investigation tomorrow.

simoncn · 31-01-2020, 00:10

I have been able to reproduce the problem. I will work on a fix tomorrow.

simoncn · (This post was last modified: 31-01-2020 13:15 by simoncn.)

MinimServer 2 update 151 is now available. It should fix this problem.

This is an automatic update, so it will be installed automatically when MinimServer is stopped and restarted from the Media Server App menu or when the Melco is powered off and on, unless you have disabled automatic updates.

Alternatively, you can install update 151 from MinimWatch (select About, then click 'Show updates' and follow the prompts).

Please let me know if you experience any problems after installing this update.

beckphotonik · 31-01-2020, 12:55

(31-01-2020 12:54)simoncn Wrote: MinimServer 2 update 151 is now available. It should fix this problem.

This is an automatic update, so it will be installed automatically when MinimServer is stopped and restarted from the Media Seerver App menu or when the Melco is powered off and on, unless you have disabled automatic updates.

Alternatively, you can install update 151 from MinimWatch (select About, then click 'Show updates' and follow the prompts).

Please let me know if you experience any problems after installing this update.

Great stuff, thanks Simon.

rjzman · 03-02-2020, 01:43

(15-12-2019 23:16)simoncn Wrote: MinimServer 2 will shortly be available for the new Melco EX series and for current Melco N10 and N100 models that have been updated to the 4.01 firmware. For more information about MinimServer 2, see this page.

Simon, with the development of Minimserver 2, how long do you see before it will be compatible with the Melco N1 MK2 series? Melco has just issued the beta firmware upgrade for the N1 series supporting the Intelligent Music Library evolution including Minimserver and Songkong.
Thanks,
rjzman

Peter@57m · (This post was last modified: 03-02-2020 07:20 by Peter@57m.)

(03-02-2020 01:43)rjzman Wrote:
(15-12-2019 23:16)simoncn Wrote: MinimServer 2 will shortly be available for the new Melco EX series and for current Melco N10 and N100 models that have been updated to the 4.01 firmware. For more information about MinimServer 2, see this page.

Simon, with the development of Minimserver 2, how long do you see before it will be compatible with the Melco N1 MK2 series? Melco has just issued the beta firmware upgrade for the N1 series supporting the Intelligent Music Library evolution including Minimserver and Songkong.
Thanks,
rjzman

It's available! See post 55 in this thread

rjzman · 03-02-2020, 07:57

(03-02-2020 07:19)Peter@57m Wrote:
(03-02-2020 01:43)rjzman Wrote:
(15-12-2019 23:16)simoncn Wrote: MinimServer 2 will shortly be available for the new Melco EX series and for current Melco N10 and N100 models that have been updated to the 4.01 firmware. For more information about MinimServer 2, see this page.

Simon, with the development of Minimserver 2, how long do you see before it will be compatible with the Melco N1 MK2 series? Melco has just issued the beta firmware upgrade for the N1 series supporting the Intelligent Music Library evolution including Minimserver and Songkong.
Thanks,
rjzman

It's available! See post 55 in this thread

Thanks, and I look forward to the full license install!
rjzman

simoncn · 03-02-2020, 10:24

The variations of different models of Melco, different firmware versions and different versions of MinimServer 2 can be somewhat confusing, so I have put a table summarizing all the combinations on this page.