Big HiRes flac files are not playable

[klak3]

Hello *,

many of my HiRes flac files are not playable.
The files are between 600-1100 MB (one LP side with 24bit/192kHz) big.
Are there any options for tuning?

Greets klak3

Raumfeld Connector2 / Linux-VM with Debian Testing (4 vCPU + 4GB)

[simoncn]

This might be a renderer issue. Have you tried using a different media server?

What exactly happens when you try to play one of these files?

Do you have any MinimStreamer transcoding options enabled?

[Hanu]

(19-01-2017 15:57)klak3 Wrote:  Hello *,

many of my HiRes flac files are not playable.
The files are between 600-1100 MB (one LP side with 24bit/192kHz) big.
Are there any options for tuning?

Greets klak3

Raumfeld Connector2 / Linux-VM with Debian Testing (4 vCPU + 4GB)

Hi klak3
Bad new's, since 3 years i use Raumfeld multiroom system.
It was never possible to play 24/192 flac, but 24/96 and lower was ok. After some software and firmware updates only 16/44.1 works for me, Raumfeld was not able to help for a rollback. I reduced all my DH files to 16/44.1 for "multiroom-listening". I'm looking for alternatives.
see:
http://www.hifi-forum.de/viewthread-212-1684.html
Hanu
Linn Majik DSM, Synology DS214SE, minimserver, Bubble DS next, BubbleUPNP server, Raumfeld connector2, cube, 2x OneM, OneS

[klak3]

@Hanu: My Connector2 plays 24/192, but not always.

I had a look to the Connector with SSH and I think the CPU- and network load is to high at 24/192. It's only 100mbit LAN this seems to be the main problem.

Other Servers (minidlna,gmedia) plays more files than the minimserver.

klak3


ps. Next week I'm testing Auralic devices.

[Hanu]

(21-01-2017 23:57)klak3 Wrote:  I had a look to the Connector with SSH and I think the CPU- and network load is to high at 24/192. It's only 100mbit LAN this seems to be the main problem.

Hi klak3
My Linn plays 24/192 on 100mit LAN well.
Which firmware has your connector?
regards Hanu