![]() |
|
Big HiRes flac files are not playable - Printable Version +- MinimServer Forum (https://forum.minimserver.com) +-- Forum: MinimServer (/forumdisplay.php?fid=1) +--- Forum: MinimStreamer (/forumdisplay.php?fid=11) +--- Thread: Big HiRes flac files are not playable (/showthread.php?tid=3846) |
Big HiRes flac files are not playable - klak3 - 19-01-2017 15:57 Hello *, many of my HiRes flac files are not playable. The files are between 600-1100 MB (one LP side with 24bit/192kHz) big. Are there any options for tuning? Greets klak3 Raumfeld Connector2 / Linux-VM with Debian Testing (4 vCPU + 4GB) RE: Big HiRes flac files are not playable - simoncn - 19-01-2017 17:15 This might be a renderer issue. Have you tried using a different media server? What exactly happens when you try to play one of these files? Do you have any MinimStreamer transcoding options enabled? RE: Big HiRes flac files are not playable - Hanu - 19-01-2017 19:34 (19-01-2017 15:57)klak3 Wrote: Hello *, Hi klak3 Bad new's, since 3 years i use Raumfeld multiroom system. It was never possible to play 24/192 flac, but 24/96 and lower was ok. After some software and firmware updates only 16/44.1 works for me, Raumfeld was not able to help for a rollback. I reduced all my DH files to 16/44.1 for "multiroom-listening". I'm looking for alternatives. see: http://www.hifi-forum.de/viewthread-212-1684.html Hanu Linn Majik DSM, Synology DS214SE, minimserver, Bubble DS next, BubbleUPNP server, Raumfeld connector2, cube, 2x OneM, OneS RE: Big HiRes flac files are not playable - klak3 - 21-01-2017 23:57 @Hanu: My Connector2 plays 24/192, but not always. I had a look to the Connector with SSH and I think the CPU- and network load is to high at 24/192. It's only 100mbit LAN this seems to be the main problem. Other Servers (minidlna,gmedia) plays more files than the minimserver. klak3 ps. Next week I'm testing Auralic devices. RE: Big HiRes flac files are not playable - Hanu - 24-01-2017 22:31 (21-01-2017 23:57)klak3 Wrote: I had a look to the Connector with SSH and I think the CPU- and network load is to high at 24/192. It's only 100mbit LAN this seems to be the main problem. Hi klak3 My Linn plays 24/192 on 100mit LAN well. Which firmware has your connector? regards Hanu |