MinimServer Forum
Upgrading to 0.8.3 - Printable Version

+- MinimServer Forum (https://forum.minimserver.com)
+-- Forum: MinimServer (/forumdisplay.php?fid=1)
+--- Forum: Support (/forumdisplay.php?fid=4)
+--- Thread: Upgrading to 0.8.3 (/showthread.php?tid=2144)



Upgrading to 0.8.3 - Gonzalez - 25-01-2015 13:11

Dear Simon,

I am having some trouble upgrading from version 0.8.2 to 0.8.3. I have followed the instructions up to and including updating the JRE package, but I have not succeeded in the manual installation of 0.8.3. My QNAP NAS has an Intel processor so I have downloaded the MinimServer-0.8.3-x86.qpkg file. I just clicked on the appropriate file in the MinimServer Downloads list. It goes into my MacBook Pro downloads directory. I have not managed to get it into the NAS.

What am I doing wrong?

Grateful for your help.

Best regards,

Gonzalez


RE: Upgrading to 0.8.3 - Gonzalez - 25-01-2015 13:27

(25-01-2015 13:11)Gonzalez Wrote:  Dear Simon,

I am having some trouble upgrading from version 0.8.2 to 0.8.3. I have followed the instructions up to and including updating the JRE package, but I have not succeeded in the manual installation of 0.8.3. My QNAP NAS has an Intel processor so I have downloaded the MinimServer-0.8.3-x86.qpkg file. I just clicked on the appropriate file in the MinimServer Downloads list. It goes into my MacBook Pro downloads directory. I have not managed to get it into the NAS.

What am I doing wrong?

Grateful for your help.

Best regards,

Gonzalez

OK, Simon, you can forget the post. I worked out what to do Idea, clicking on the Manual Install button in the My Apps page, and browsing to find the 0.8.3 file in my downloads folder. Simples Smile


RE: Upgrading to 0.8.3 - nonesup - 08-02-2015 18:54

Hi Simon .
MinimServer not get updated to version 0.8.3 on my Synology DS214 Play. Logically either 0.5 Minim Streemer .
I have installed Java version 7 , but in the "Packages" section of Minim Watch me not appear packages available.
Regards
Francisco


RE: Upgrading to 0.8.3 - simoncn - 10-02-2015 17:58

(08-02-2015 18:54)nonesup Wrote:  Hi Simon .
MinimServer not get updated to version 0.8.3 on my Synology DS214 Play. Logically either 0.5 Minim Streemer .
I have installed Java version 7 , but in the "Packages" section of Minim Watch me not appear packages available.
Regards
Francisco

To update to 0.8.3, you need to download it from the MinimServer website and do a manual install in the Synology Package Center.


RE: Upgrading to 0.8.3 - ppienter - 13-02-2015 14:53

Hi Simon,

I did an upgrade to 0.8.3 on my QNAP (also updated later JRE to 8.6.0) but Minimserver is no longer showing as an DLNA device on my Denon and in foobar...

What could be causing this ?


Thanks


RE: Upgrading to 0.8.3 - simoncn - 13-02-2015 16:19

(13-02-2015 14:53)ppienter Wrote:  Hi Simon,

I did an upgrade to 0.8.3 on my QNAP (also updated later JRE to 8.6.0) but Minimserver is no longer showing as an DLNA device on my Denon and in foobar...

What could be causing this ?


Thanks

Does MinimServer show as ON in the QNAP App Center? If not, change it from OFF to ON. If it is showing as ON, change it to OFF and then then to ON.

If this doesn't fix it, try rebooting the QNAP.


RE: Upgrading to 0.8.3 - ppienter - 13-02-2015 18:51

(13-02-2015 16:19)simoncn Wrote:  Does MinimServer show as ON in the QNAP App Center? If not, change it from OFF to ON. If it is showing as ON, change it to OFF and then then to ON.

If this doesn't fix it, try rebooting the QNAP.

I tried the above before posting and it was not showing directly. After about 15 minutes it became available although it showed running on the http port 9790 right after reboot but in the meantime I had made my post. Could there be a delay after an upgrade ? Most important is that now it's working fine.


RE: Upgrading to 0.8.3 - simoncn - 13-02-2015 20:09

(13-02-2015 18:51)ppienter Wrote:  I tried the above before posting and it was not showing directly. After about 15 minutes it became available although it showed running on the http port 9790 right after reboot but in the meantime I had made my post. Could there be a delay after an upgrade ? Most important is that now it's working fine.

A 15-minute delay means that you have a problem with the multicast configuration of your network. Does your router have a setting to enable multicast or disable IGMP snooping?


RE: Upgrading to 0.8.3 - nonesup - 15-02-2015 19:23

Hi Simon .
I installed Minim Server as he said, and also the latest version of Minim Watch.
Well the icon of Minim Watch now is not green but yellow. I restarted but nothing changes
Regards


(10-02-2015 17:58)simoncn Wrote:  
(08-02-2015 18:54)nonesup Wrote:  Hi Simon .
MinimServer not get updated to version 0.8.3 on my Synology DS214 Play. Logically either 0.5 Minim Streemer .
I have installed Java version 7 , but in the "Packages" section of Minim Watch me not appear packages available.
Regards
Francisco

To update to 0.8.3, you need to download it from the MinimServer website and do a manual install in the Synology Package Center.



RE: Upgrading to 0.8.3 - nonesup - 15-02-2015 19:25

Oh! Excuse me, are just putting Green

(15-02-2015 19:23)nonesup Wrote:  Hi Simon .
I installed Minim Server as he said, and also the latest version of Minim Watch.
Well the icon of Minim Watch now is not green but yellow. I restarted but nothing changes
Regards


(10-02-2015 17:58)simoncn Wrote:  
(08-02-2015 18:54)nonesup Wrote:  Hi Simon .
MinimServer not get updated to version 0.8.3 on my Synology DS214 Play. Logically either 0.5 Minim Streemer .
I have installed Java version 7 , but in the "Packages" section of Minim Watch me not appear packages available.
Regards
Francisco

To update to 0.8.3, you need to download it from the MinimServer website and do a manual install in the Synology Package Center.