+- MinimServer Forum (https://forum.minimserver.com)
+-- Forum: MinimServer (/forumdisplay.php?fid=1)
+--- Forum: General (/forumdisplay.php?fid=2)
+--- Thread: GETTING STARTED (/showthread.php?tid=2622)
RE: GETTING STARTED - simoncn - 10-12-2015 19:08
(10-12-2015 18:51)rockerz Wrote: So problem still persists regardless of device I try. IGMP snooping is definitely disabled on both router and switch. Any chance it could be a setting on Qnap?
It's worth checking Security under System Settings in the QNAP Control Panel. I have Security Level set to 'Allow all connections' and Network Access Protection disabled. What settings do you have?
RE: GETTING STARTED - rockerz - 10-12-2015 19:15
I will check later and let you know. What about SSDP? Is that something that is relevant?
RE: GETTING STARTED - simoncn - 10-12-2015 20:37
(10-12-2015 19:15)rockerz Wrote: I will check later and let you know. What about SSDP? Is that something that is relevant?
SSDP is very relevant. Where have you seen this setting?
RE: GETTING STARTED - rockerz - 10-12-2015 20:50
I have just been reading about it. After work I will check on theNAS and see if I can find settings for that
RE: GETTING STARTED - simoncn - 10-12-2015 21:48
(10-12-2015 20:50)rockerz Wrote: I have just been reading about it. After work I will check on theNAS and see if I can find settings for that
It's unlikely that you will find a NAS setting for SSDP. The only NAS setting that's likely to affect SSDP discovery is the Security setting.
RE: GETTING STARTED - rockerz - 11-12-2015 01:50
The security settings were as you recommended. I could not find any path to adjust the SSDP settings. At this point I am open to any suggestions.
RE: GETTING STARTED - rockerz - 11-12-2015 01:55
I have been using a Samsung tablet and the problem is even worse on that. When the tablet goes to sleep it has a hard time finding Minimserver again when it wakes, even after a minute or so.
RE: GETTING STARTED - simoncn - 11-12-2015 08:04
(11-12-2015 01:50)rockerz Wrote: The security settings were as you recommended. I could not find any path to adjust the SSDP settings. At this point I am open to any suggestions.
It can sometimes be difficult to find the correct configuration setting for disabling IGMP snooping. Sometimes this setting appears in more than one place in the configuration pages. Can you post screenshots for the router and the switch showing the configuration pages where you have applied the setting to disable IGMP snooping?
RE: GETTING STARTED - rockerz - 12-12-2015 01:55
I cannot get my Mac to paste the screenshot in the reply window.
(11-12-2015 08:04)simoncn Wrote:(11-12-2015 01:50)rockerz Wrote: The security settings were as you recommended. I could not find any path to adjust the SSDP settings. At this point I am open to any suggestions.
It can sometimes be difficult to find the correct configuration setting for disabling IGMP snooping. Sometimes this setting appears in more than one place in the configuration pages. Can you post screenshots for the router and the switch showing the configuration pages where you have applied the setting to disable IGMP snooping?
RE: GETTING STARTED - Dieter Stockert - 12-12-2015 06:12
(12-12-2015 01:55)rockerz Wrote: I cannot get my Mac to paste the screenshot in the reply window.I found this:
Cmd + Shift + 3 (takes full screen in clipboard)
Cmd + Ctrl + Shift + 4 (takes selected area in clipboard)
Cmd + Ctrl + Shift + 4, then Space (takes selected element or window in clipboard)