MinimServer Forum
MinimServer stopped working on QNAP - Printable Version

+- MinimServer Forum (https://forum.minimserver.com)
+-- Forum: MinimServer (/forumdisplay.php?fid=1)
+--- Forum: Support (/forumdisplay.php?fid=4)
+--- Thread: MinimServer stopped working on QNAP (/showthread.php?tid=4280)

Pages: 1 2 3


RE: MinimServer stopped working on QNAP - simoncn - 12-12-2017 07:01

(12-12-2017 01:51)Martin H Wrote:  I have a Melco and the other NAS are TS421s all bought at the same time and in theory with the same data.

Does the failing machine have a different configuration, such as a VPN? If so, please post full details of the VPN setup.


RE: MinimServer stopped working on QNAP - Peter StreamMagic - 12-12-2017 08:16

(12-12-2017 06:47)simoncn Wrote:  
(12-12-2017 00:22)Peter StreamMagic Wrote:  My QNAP also failed after updating ,it is a TS 119 P2.

Peter.

Is the failure the same, i.e., that MinimWatch can't see MinimServer?

When the problem is occurring, is the MinimServer status web page working? You can check this by going to http://x.x.x.x:9790 in a web browser, where x.x.x.x is the IP address of the NAS.
Yes and the systemtray is grey
I tried to start MinimServer from the QNAPweb page: it said cant connect to http://x.x.x.x:9790.
I think this is basicly the same as entering http://x.x.x.x:9790 entering on the PC directly? Other thing: I get a warning on firewall settings but did not change anything!


RE: MinimServer stopped working on QNAP - simoncn - 12-12-2017 08:56

I have been able to reproduce the problem on my QNAP TS-119. It is a caused by a crash in the latest level of ohNet, whcih was included in updates 111 and 112.

I have published update 113 which reverts to a previous level of ohNet that is known to work OK. If you have autoUpdate set to true, update 113 will install automatically when you do the following:

1) In the App Center, select Stop from the drop-down menu of the MinimServer icon

2) Wait for the MinimServer icon to change from green to grey

3) Select Start from the MinimServer icon


RE: MinimServer stopped working on QNAP - Peter StreamMagic - 12-12-2017 09:16

(12-12-2017 08:56)simoncn Wrote:  I have been able to reproduce the problem on my QNAP TS-119. It is a caused by a crash in the latest level of ohNet, whcih was included in updates 111 and 112.

I have published update 113 which reverts to a previous level of ohNet that is known to work OK. If you have autoUpdate set to true, update 113 will install automatically when you do the following:

1) In the App Center, select Stop from the drop-down menu of the MinimServer icon

2) Wait for the MinimServer icon to change from green to grey

3) Select Start from the MinimServer icon
I will have a try tonight, some people have to work during the day.


RE: MinimServer stopped working on QNAP - Donuk - 12-12-2017 10:02

I have the same problem on my TS112.
Tried deleting Minimserver and Java last evening and reinstalling.
Still cannot get to the http page. Safari and Chrome.
Tried switching off antivirus.
Currently reverted to Twonky.....
No rush. Waiting for a solution.

donuk sunny and frosty downtown York


RE: MinimServer stopped working on QNAP - simoncn - 12-12-2017 10:08

(12-12-2017 10:02)Donuk Wrote:  I have the same problem on my TS112.
Tried deleting Minimserver and Java last evening and reinstalling.
Still cannot get to the http page. Safari and Chrome.
Tried switching off antivirus.
Currently reverted to Twonky.....
No rush. Waiting for a solution.

donuk sunny and frosty downtown York

The solution is available now. See this post.


RE: MinimServer stopped working on QNAP - Martin H - 12-12-2017 10:27

(12-12-2017 07:01)simoncn Wrote:  
(12-12-2017 01:51)Martin H Wrote:  I have a Melco and the other NAS are TS421s all bought at the same time and in theory with the same data.

Does the failing machine have a different configuration, such as a VPN? If so, please post full details of the VPN setup.

No - they were all set up at the same time in the same way. Even the data matches = or should do Smile. The only difference that I can see is that I run the QNAP Photo server on the one that failed, whereas it is 'stopped on all of the others'. But that was running both before and after I deleted the playlist. After that -last night all seemed good.

This morning I have been prompted to update to 113 and have done on all servers. Minimwatch has crashed/disappeared twice while that was happening but seems OK at the moment. At one time it was showing one server twice - the Melco but then it crashed.

Also very odd was that on the 2 other servers the log included the same errors for the elaine.m3u playlist this morning and yet I deleted it last night??? I have rescanned and it has disappeared. Maybe this is expected behaviour I don't know but log is below.

I have searched for all m3u files and its definitely not there.

Current time is Tue Dec 12 10:09:27 GMT 2017 in time zone Europe/London
starting MinimServer[HAYESTS421BUP]
Error: playlist BBC Radio/Radio.m3u: MinimStreamer is required for stream ID 'R1'
Error: playlist BBC Radio/Radio.m3u: MinimStreamer is required for stream ID 'R1X'
Error: playlist BBC Radio/Radio.m3u: MinimStreamer is required for stream ID 'R2'
Error: playlist BBC Radio/Radio.m3u: MinimStreamer is required for stream ID 'R3'
Error: playlist BBC Radio/Radio.m3u: MinimStreamer is required for stream ID 'R3DASH'
Error: playlist BBC Radio/Radio.m3u: MinimStreamer is required for stream ID 'R4'
Error: playlist BBC Radio/Radio.m3u: MinimStreamer is required for stream ID 'R4X'
Error: playlist BBC Radio/Radio.m3u: MinimStreamer is required for stream ID 'R4L'
Error: playlist BBC Radio/Radio.m3u: MinimStreamer is required for stream ID 'R5'
Error: playlist BBC Radio/Radio.m3u: MinimStreamer is required for stream ID 'R5X'
Error: playlist BBC Radio/Radio.m3u: MinimStreamer is required for stream ID 'R6'
Error: playlist BBC Radio/Radio.m3u: MinimStreamer is required for stream ID 'AN'
Error: playlist BBC Radio/Radio.m3u: MinimStreamer is required for stream ID 'WS'
Error: playlist Elaine.m3u: no matching file for Phil Collins/Face Value - 24/._01 In The Air Tonight.flac
Error: playlist Elaine.m3u: no matching file for Phil Collins/Face Value - 24/._02 This Must Be Love.flac
Error: playlist Elaine.m3u: no matching file for Phil Collins/Face Value - 24/._03 Behind The Lines.flac
Error: playlist Elaine.m3u: no matching file for Phil Collins/Face Value - 24/._04 The Roof Is Leaking.flac
Error: playlist Elaine.m3u: no matching file for Phil Collins/Face Value - 24/._05 Droned.flac
Error: playlist Elaine.m3u: no matching file for Phil Collins/Face Value - 24/._06 Hand In Hand.flac
Error: playlist Elaine.m3u: no matching file for Phil Collins/Face Value - 24/._07 I Missed Again.flac
Error: playlist Elaine.m3u: no matching file for Phil Collins/Face Value - 24/._08 You Know What I Mean.flac
Error: playlist Elaine.m3u: no matching file for Phil Collins/Face Value - 24/._09 Thunder And Lightning.flac
Error: playlist Elaine.m3u: no matching file for Phil Collins/Face Value - 24/._10 I'm Not Moving.flac
Error: playlist Elaine.m3u: no matching file for Phil Collins/Face Value - 24/._11 If Leaving Me Is Easy.flac
Error: playlist Elaine.m3u: no matching file for Phil Collins/Face Value - 24/._12 Tomorrow Never Knows.flac
MinimServer[HAYESTS421BUP] is running


RE: MinimServer stopped working on QNAP - Donuk - 12-12-2017 10:27

Sorted. 113 installed.
Sorry for thickness at this end, and thanks for prompt response..
Don


RE: MinimServer stopped working on QNAP - Martin H - 12-12-2017 10:28

Apologies I had not see the post - I was typing Smile

As ever - thank you for the prompt responses and fix. I didn't even get to answer all of the questions!


RE: MinimServer stopped working on QNAP - daedlo - 12-12-2017 10:59

(12-12-2017 06:49)simoncn Wrote:  
(11-12-2017 21:02)leighton buzzard Wrote:  Just updated Minimserver on my QNAP and now it wont run. MinimWatch log is showing the following message...

[MinimServer] is running
Error 1 [Unknown] invoking GetAllPackageStatus on remote runtime monitor
Error 1 [Unknown] invoking GetProperty on remote runtime monitor
Error 1 [Unknown] invoking GetProperty on remote runtime monitor

(11-12-2017 22:00)daedlo Wrote:  I have the same problem.
MinimServer did auto update to 112 this morning and since then am unable to access. I have tried via Linn Kazoo on iPad as well as MinimWatch on iMac and Win10 pc.
I have re-installed MinimServer on the QNAP NAS I use for my music files with no difference. I have switched NAS off/on with no difference. The only indication I get is the error message in MinimWatch:
Error 1 [Unknown] invoking GetProperty on remote runtime monitor

When the problem is occurring, is the MinimServer status web page working? You can check this by going to http://x.x.x.x:9790 in a web browser, where x.x.x.x is the IP address of the NAS.

In my case I am using a TS212 NAS. I am unable to access the MinimServer web page with Safari. There is a short time after my initial start of MinimWatch when the status is green. However, on trying to access the server it goes to grey and only the bottom three options are available.