Update 192 problem?/ Version 2.0.18
|
07-04-2021, 15:11
(This post was last modified: 22-04-2021 11:42 by MarmiteSandwich.)
Post: #1
|
|||
|
|||
Update 192 problem?/ Version 2.0.18
Minimserver 2 crashed updating to 192. Does not start after reboot. Monit has attempted to restart it, but it stops again.
Ras Pi 3B+, Buster First few lines of crash log look like this:- Code: MinimServer crash dump, produced at 20210407-134559.559 Regards, Marmite Server :: RaspberryPi3B+>Minimserver 2 Control : Android>BubbleUPnP / W10>Upplay / W10>Kazoo / iPhone>Kazoo Renderer: BubbleUPnP Server>Cambridge Audio CXN V2 |
|||
07-04-2021, 16:52
Post: #2
|
|||
|
|||
RE: Update 192 problem?
It looks like there was an error while downloading one of the files in update 192. To download update 192 again, do the following:
1) Open the Packages tab of the Properties page 2) Select minimserver-update-192 and click Remove 3) In the "Other package" field, type minimserver-update-192 and click Install 4) Follow the prompts to install update 192 5) When the package has been installed successfully, click Relaunch |
|||
07-04-2021, 17:00
(This post was last modified: 07-04-2021 18:40 by MarmiteSandwich.)
Post: #3
|
|||
|
|||
RE: Update 192 problem?
(07-04-2021 16:52)simoncn Wrote: It looks like there was an error while downloading one of the files in update 192. To download update 192 again, do the following: But doesn't that require MinimServer to be running in order to open Properties? I can't get it to run at all. EDIT: I managed to do the above via the MS console, and I got: Code: >updates Server :: RaspberryPi3B+>Minimserver 2 Control : Android>BubbleUPnP / W10>Upplay / W10>Kazoo / iPhone>Kazoo Renderer: BubbleUPnP Server>Cambridge Audio CXN V2 |
|||
07-04-2021, 20:59
Post: #4
|
|||
|
|||
RE: Update 192 problem?
I have successfully downloaded and installed update 192 on a Pi4 running Buster. I think this means your MinimServer installation on this device has become corrupt in some way.
Please post the output from the following commands: Code: ls -l minimserver/tmp/native |
|||
07-04-2021, 21:08
Post: #5
|
|||
|
|||
RE: Update 192 problem?
Code: root@RasPiFaircross:/home/pi# ls -l minimserver/tmp/native Server :: RaspberryPi3B+>Minimserver 2 Control : Android>BubbleUPnP / W10>Upplay / W10>Kazoo / iPhone>Kazoo Renderer: BubbleUPnP Server>Cambridge Audio CXN V2 |
|||
07-04-2021, 21:30
Post: #6
|
|||
|
|||
RE: Update 192 problem?
You have a mixture of files owned by pi and root. When installing or updating MinimServer, you must do everything as the 'pi' user.
To recover from this, use sudo to remove the entire minimserver directory and all its subdirectories, then start again from scratch. |
|||
07-04-2021, 21:34
Post: #7
|
|||
|
|||
RE: Update 192 problem?
(07-04-2021 21:30)simoncn Wrote: You have a mixture of files owned by pi and root. When installing or updating MinimServer, you must do everything as the 'pi' user.OK, many thanks. I will reinstall totally. I have had many unexplained glitches with MinimServer (and/or mpd/upmpdcli). Maybe this is why. Cheers, Marmite. Server :: RaspberryPi3B+>Minimserver 2 Control : Android>BubbleUPnP / W10>Upplay / W10>Kazoo / iPhone>Kazoo Renderer: BubbleUPnP Server>Cambridge Audio CXN V2 |
|||
07-04-2021, 21:43
Post: #8
|
|||
|
|||
RE: Update 192 problem?
Also, you must use the 'pi' user to run MinimServer. If at any stage MinimServer needs root privilege, it will obtain this automatically.
|
|||
22-04-2021, 10:40
Post: #9
|
|||
|
|||
RE: Update 192 problem?/Update 2.0.18?
(07-04-2021 21:43)simoncn Wrote: Also, you must use the 'pi' user to run MinimServer. If at any stage MinimServer needs root privilege, it will obtain this automatically.Many thanks for all of the above advice - Minimserver reinstalled satisfactorily. Used up one more license, but I still have 1 left, so not a problem unless I have to do it repeatedly. However, I have just installed update 193, as advised by MinimWatch and via MinimWatch, which was fine, but I got an advisory to update to MinimServer 2.0.18. Following Properties>Packages in MinimWatch, I don't see this version as being available. Am I missing something? Server :: RaspberryPi3B+>Minimserver 2 Control : Android>BubbleUPnP / W10>Upplay / W10>Kazoo / iPhone>Kazoo Renderer: BubbleUPnP Server>Cambridge Audio CXN V2 |
|||
22-04-2021, 13:37
Post: #10
|
|||
|
|||
RE: Update 192 problem?/ Version 2.0.18
2.0.18 is not an online update. It must be downloaded and installed as you have just done for 2.0.16. This should not use an additional license activation and I am not sure why this happened after your previous install.
|
|||
« Next Oldest | Next Newest »
|
User(s) browsing this thread: 1 Guest(s)