Post Reply 
 
Thread Rating:
  • 3 Vote(s) - 4.33 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[Tutorial] Installing MinimServer on FreeNAS or FreeBSD
15-04-2021, 01:00
Post: #101
RE: [Tutorial] Installing MinimServer on FreeNAS or FreeBSD
I am successfully running two instances in a single jail on TrueNAS 12.

I created the two uniquely named home directories as you did, then installed the first instance in the first directory, used MinimWatch to change the http.port from 9790 to 9792 and the ohnet.port from 9791 to 9793, relaunched the instance, and then installed the second instance in the second directory (which then used the original 9790 and 9791 port numbers).
Find all posts by this user
Quote this message in a reply
15-04-2021, 08:13 (This post was last modified: 15-04-2021 08:19 by simoncn.)
Post: #102
RE: [Tutorial] Installing MinimServer on FreeNAS or FreeBSD
Is this MinimServer 0.8 or MinimServer 2? This approach is required for MinimServer 0.8 and can be used as a workaround if the automatic port assignment in MinimServer 2 cannot be used (i.e., on FreeBSD).
Find all posts by this user
Quote this message in a reply
15-04-2021, 08:38
Post: #103
RE: [Tutorial] Installing MinimServer on FreeNAS or FreeBSD
I used it originally with MinimServer 0.8 as it was required and then continued to use it when I did a clean install with 2 (if I recall I didn't test automatic port assignment in 2 but assumed it wouldn't work). 0.8 was on FreeNAS 11 and 2 was on FreeNAS 11 and then TrueNAS CORE 12 when that replaced FreeNAS.
Find all posts by this user
Quote this message in a reply
15-04-2021, 13:41
Post: #104
RE: [Tutorial] Installing MinimServer on FreeNAS or FreeBSD
(15-04-2021 08:38)abooker Wrote:  I used it originally with MinimServer 0.8 as it was required and then continued to use it when I did a clean install with 2 (if I recall I didn't test automatic port assignment in 2 but assumed it wouldn't work). 0.8 was on FreeNAS 11 and 2 was on FreeNAS 11 and then TrueNAS CORE 12 when that replaced FreeNAS.

Yes this is on TrueNAS CORE 12, and MinimServer2. I'll try playing with the start one instance, adjust ports via MinimWatch, then start second instance. Although i'm also playing with just have multiple jails. Multiple jails is slightly easier to configure i'm just not sure if i can reuse the same license with multiple jails, but will test. I'm only looking to have a total of two instances.
Find all posts by this user
Quote this message in a reply
01-06-2021, 00:43 (This post was last modified: 02-06-2021 18:44 by Riflen.)
Post: #105
RE: [Tutorial] Installing MinimServer on FreeNAS or FreeBSD
Is anyone successfully running Minimserver 2 in a jail on XigmaNAS 12.2 (FreeBSD 12.2)?

I can get the server to run and reach the Status web page running on TCP 9790, however the server never seems to run a service on UDP 1900 and so it's not detectable by Minimwatch or any control points on my network. There's no firewall enabled in the jail.

I'm using the ohnet 1.30.3937 build provided by airflow and tried server versions 187 and 193. I've turned up ohnet debugging but nothing relevant is written to the minimserver.log.

The jail has functioning networking as far as I can tell. I'm even running a Subsonic instance within it. I can run Minimserver successfully from Windows hosts on my network. Any pointers would be appreciated.

EDIT: It seems UDP 1900 is only used by Minimstreamer and isn't related to the problem I'm having.
This would strongly indicate it's a network problem of some kind. I'll keep looking in that direction.

2ND EDIT: I solved it. The guide on installing Minimserver in Linux containers gave me a clue as to what might be wrong. The basic jail networking option, although functional in every other way, is no good for UPnP even though all hosts involved were in the same subnet. I had to "Enable virtual network stack (vnet)" for the jail. Thanks for the thorough docs.
Find all posts by this user
Quote this message in a reply
16-06-2021, 16:52
Post: #106
upgrade from 2.0.16 to 2.0.18
I did some tests regarding the upgrade from MinimServer 2.0.16 to 2.0.18, which is not covered by the integrated upgrade procedures but instead has to be installed manually.

I can report that the new version 2.0.18 works fine and the installation instructions given in this thread are still valid and exactly the same.

No new version of ohNet is being used so the precompiled libraries can be used again for this version.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)