Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
multiple nic NAS server
25-09-2015, 10:03
Post: #1
multiple nic NAS server
Hello Simon,

my Cambridge Audio streamer has a problem with jumbo frames enabled on a NIC.
That is why I configured one NIC with and one without jumbo frames.
This worked fine as minimserver can be accessed on both NIC's but now I see that minimserver properties gives the wrong NIC (192.168.1.44 with jumbo frames).
My streamer cannot 'see' minimserver. Is there a way to set the preferred NIC (192.168.1.45 normal packet size)? Any idea why it cannot be accessed on both NIC's?

thanks,
Stefan
Find all posts by this user
Quote this message in a reply
25-09-2015, 10:28
Post: #2
RE: multiple nic NAS server
** added comment: on some servers like mediamonkey, you can set a specific LAN adapter. This is why I presume it must be possible to set a preferred adapter for minimserver to run on **
Find all posts by this user
Quote this message in a reply
25-09-2015, 15:08
Post: #3
RE: multiple nic NAS server
You can set a preferred subnet but you can't set a preferred NIC if both NICs are on the same subnet (192.168.1.x in your case). This is a limitation of the ohNet UPnP stack that MinimServer is using.
Find all posts by this user
Quote this message in a reply
25-09-2015, 15:10
Post: #4
RE: multiple nic NAS server
Hello Simon,

as I said, it worked fine before so I decided a few minutes ago to restart the NAS and presto... MinimServer is discovered. Problem solved. Thanks again for your reply and the Minim productline.

cheers,
Stefan
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)