Search
Member List
Calendar
Help
|
Upgrading to 0.8.3
|
|
25-01-2015, 13:11
Post: #1
|
|||
|
|||
|
Upgrading to 0.8.3
Dear Simon,
I am having some trouble upgrading from version 0.8.2 to 0.8.3. I have followed the instructions up to and including updating the JRE package, but I have not succeeded in the manual installation of 0.8.3. My QNAP NAS has an Intel processor so I have downloaded the MinimServer-0.8.3-x86.qpkg file. I just clicked on the appropriate file in the MinimServer Downloads list. It goes into my MacBook Pro downloads directory. I have not managed to get it into the NAS. What am I doing wrong? Grateful for your help. Best regards, Gonzalez |
|||
|
|
25-01-2015, 13:27
Post: #2
|
|||
|
|||
RE: Upgrading to 0.8.3
(25-01-2015 13:11)Gonzalez Wrote: Dear Simon, OK, Simon, you can forget the post. I worked out what to do  , clicking on the Manual Install button in the My Apps page, and browsing to find the 0.8.3 file in my downloads folder. Simples 
|
|||
|
|
|
08-02-2015, 18:54
Post: #3
|
|||
|
|||
|
RE: Upgrading to 0.8.3
Hi Simon .
MinimServer not get updated to version 0.8.3 on my Synology DS214 Play. Logically either 0.5 Minim Streemer . I have installed Java version 7 , but in the "Packages" section of Minim Watch me not appear packages available. Regards Francisco |
|||
|
|
|
10-02-2015, 17:58
Post: #4
|
|||
|
|||
RE: Upgrading to 0.8.3
(08-02-2015 18:54)nonesup Wrote: Hi Simon . To update to 0.8.3, you need to download it from the MinimServer website and do a manual install in the Synology Package Center. |
|||
|
|
|
13-02-2015, 14:53
Post: #5
|
|||
|
|||
|
RE: Upgrading to 0.8.3
Hi Simon,
I did an upgrade to 0.8.3 on my QNAP (also updated later JRE to 8.6.0) but Minimserver is no longer showing as an DLNA device on my Denon and in foobar... What could be causing this ? Thanks |
|||
|
|
|
13-02-2015, 16:19
Post: #6
|
|||
|
|||
RE: Upgrading to 0.8.3
(13-02-2015 14:53)ppienter Wrote: Hi Simon, Does MinimServer show as ON in the QNAP App Center? If not, change it from OFF to ON. If it is showing as ON, change it to OFF and then then to ON. If this doesn't fix it, try rebooting the QNAP. |
|||
|
|
|
13-02-2015, 18:51
Post: #7
|
|||
|
|||
RE: Upgrading to 0.8.3
(13-02-2015 16:19)simoncn Wrote: Does MinimServer show as ON in the QNAP App Center? If not, change it from OFF to ON. If it is showing as ON, change it to OFF and then then to ON. I tried the above before posting and it was not showing directly. After about 15 minutes it became available although it showed running on the http port 9790 right after reboot but in the meantime I had made my post. Could there be a delay after an upgrade ? Most important is that now it's working fine. |
|||
|
|
|
13-02-2015, 20:09
Post: #8
|
|||
|
|||
RE: Upgrading to 0.8.3
(13-02-2015 18:51)ppienter Wrote: I tried the above before posting and it was not showing directly. After about 15 minutes it became available although it showed running on the http port 9790 right after reboot but in the meantime I had made my post. Could there be a delay after an upgrade ? Most important is that now it's working fine. A 15-minute delay means that you have a problem with the multicast configuration of your network. Does your router have a setting to enable multicast or disable IGMP snooping? |
|||
|
|
|
15-02-2015, 19:23
Post: #9
|
|||
|
|||
|
RE: Upgrading to 0.8.3
Hi Simon .
I installed Minim Server as he said, and also the latest version of Minim Watch. Well the icon of Minim Watch now is not green but yellow. I restarted but nothing changes Regards (10-02-2015 17:58)simoncn Wrote:(08-02-2015 18:54)nonesup Wrote: Hi Simon . |
|||
|
|
|
15-02-2015, 19:25
Post: #10
|
|||
|
|||
|
RE: Upgrading to 0.8.3
Oh! Excuse me, are just putting Green
(15-02-2015 19:23)nonesup Wrote: Hi Simon . |
|||
|
|
|
« Next Oldest | Next Newest »
|
User(s) browsing this thread: 1 Guest(s)