Minim server instllation on Dietpi

[simbun]

(23-06-2024 02:29)praveensg8 Wrote:  Yes Iam using Bubble UPnp installed on my android phone to play the music from Minim Server.
Its working when i stream to my AV receiver but not to the Dietpi, Iam using Hdmi out of Allo usb bridge

Is the Allo USB bridge automatically detected in the 'dietPi-Config > Audio Options > Sound card' config?

I'm afraid I don't know enough about DietPi to be able to help any further. You'll probably be better off asking on the DietPi forums, but before you do that I'd try the 3.5mm out to verify that everything in the chain is working.

[stefano_mbp]

Are you aware that HDMI output is not I2S? Which device is the Allo connected to?

[simbun]

(23-06-2024 09:46)stefano_mbp Wrote:  Are you aware that HDMI output is not I2S? Which device is the Allo connected to?

I hadn't really thought about the bridge, but you're not going to get much sound out of a Allo USB Bridge on the HDMI port!

@praveensg8

If you've selected the Allo Bridge in the DietPi settings you'll likely need to change it to a HDMI setting if you want to output over HDMI instead.

[praveensg8]

(23-06-2024 10:09)simbun Wrote:  

(23-06-2024 09:46)stefano_mbp Wrote:  Are you aware that HDMI output is not I2S? Which device is the Allo connected to?

I hadn't really thought about the bridge, but you're not going to get much sound out of a Allo USB Bridge on the HDMI port!

@praveensg8

If you've selected the Allo Bridge in the DietPi settings you'll likely need to change it to a HDMI setting if you want to output over HDMI instead.

IT working now after manually selecting the Hdmi autdio out settings in Dietpi.
Only issue is the continous play back iam facing.The song stops after playing one song and doesn't go to the next.

[simoncn]

Check your BubbleUPnP settings for gapless playback. They might not be correct for the DietPi renderer/player.

[simbun]

(23-06-2024 13:12)praveensg8 Wrote:  IT working now after manually selecting the Hdmi autdio out settings in Dietpi.
Only issue is the continous play back iam facing.The song stops after playing one song and doesn't go to the next.

I didn't experience that with default settings in BubbleUPnP.

I've just tried 'Use Eventing' and that seems to work well, so I'd enable that in addition to 'Gapless Playback' as @simoncn suggested. To change those settings, select the vertical ellipsis next to the renderer in BubbleUPnP, then Settings.