Language Change with Qnap

[hjfisch]

I'm running minimserver on a QNAP Nas .
All Nas-settings are set to German , but the minimserver still stays in english .
I can't find any option at the properties page to change the language . No working information in the forum or the Help-page either .

I've played around a little in the settings and managed it to work .

[simoncn]

To change the MinimServer language to German, do the following:

1) In QTS, select the drop-down for the logged-in user at the top of the screen and select German as your language. Do not select Auto Detect (Auto-Erkennung).
2) Stop MinimServer from App Center
3) Start MinimServer from App Center

You should now see the MinimServer menus in German.

[hjfisch]

Hello ,
Thank you for the reply , but this did not work for me .
The solution was in the settings of minimserver .

(20-03-2024 22:33)simoncn Wrote:  To change the MinimServer language to German, do the following:

1) In QTS, select the drop-down for the logged-in user at the top of the screen and select German as your language. Do not select Auto Detect (Auto-Erkennung).
2) Stop MinimServer from App Center
3) Start MinimServer from App Center

You should now see the MinimServer menus in German.

   

[simoncn]

I checked this before posting. It works on my QNAP HS-264. It is important to stop MinimServer from App Center so that the system language setting can be refreshed.

The language setting in serverOptions overrides the default setting from the platform running MinimServer (QNAP, Synology, Melco, etc.) Also, it can be used on platforms where there is no system default or where the system default is not the same language that you want to use for MinimServer.