Problem with untagged files

[simoncn]

(10-07-2013 21:45)Budgie Wrote:  Hi Simon,

Just updated minimserver and made a small contribution by way of showing appreciation. Thanks agaoin for your brilliant work. I updated minimwatch on my linux machine too. I used your info from way back to try and get the firewall to permit minimwatch to work. I now have it half right as minimwatch works to control server but oddly remains green even when I restart server, which is not how it is on windoze machine. I have opened UDP and TCP ports 1900 and entered SSDP and UPnP in the protocol box but I am not sure this is the correct syntax. Any further light you can shine would be appreciated.

I don't have any experience with Linux firewalls. By default, MinimServer uses port 9790 (TCP) for its HTTP server. You can use the ohnet.port property to configure MinimServer to use port 9791 or any other fixed number (TCP) for the ohNet device server.

Quote:After sending you the file I used atomicparsley to have a look at the tagging info and discovered what you have confirmed; that there is a bunch of mdat atoms before the moov atom. Thanks for the suggested fix. Will try it now.

FYI I am getting different results with these files when using BubbleDS and BubbleUPnP. Not sure if there is any issue with minimserver but the files are handled differently by these control apps and neither work well but I can play the audio files on the SIII using BubbleUPnP. I shall be raising my problems with bubbleguuum in due course but if you have any further info which may be relevant, please let me know.

Thanks again for your help.
Regards,
Budgie

BubbleDS is intended for use with a Linn DS, and BubbleUPnP is intended for use with other UPnP renderers. For playing files on the SIII, you need to use BubbleUPnP because you're not using a Linn DS as the renderer.