Rescan problem on Melco?

[simoncn]

Welcome to the MinimServer forum!

Rescanning via the Melco OLED should be exactly the same as rescanning via MinimWatch or via the configuration web page. Please do the following to confirm whether the rescan is happening correctly:

1) Start MinimWatch on your Mac
2) From the minim icon, select 'Show log'
3) In the log window, set the logging level to Verbose
4) Initiate a rescan from the Melco OLED

In the log window, you should see a lot of "Scanning directory" messages. Rescanning via MinimWatch or via the configuration web page should produce the same messages.

Edit: I have noticed that the Melco OLED returns OK very quickly and before the rescan has finished. This explains why the time appeared to be much less when you did the rescan this way. You can check whether the rescan has finished by going to Status on the OLED. When the Music Database line changes to Running, the rescan is complete.