Can minim server apply different setting by DLNA render?

[lyapounov]

(04-02-2020 07:27)mmx139 Wrote:  

(03-02-2020 16:43)simoncn Wrote:  It is worth trying. The full description of how to do this is in this section. For what you have described, the stream.transcode property should be set to dsf:-/wav24;96. This sends two streams: the first (-) is not transcoded and the second (wav24;96) is transcoded to PCM WAV at 24/96. The order is significant because if things are working correctly the control point should use the first stream that is playable on the selected renderer.

Thanks so much, I read the document yesterday but I did not know a "-" stands for a bypass. I just re-read and found it. Somehow it was ignored by me yesterday。 ;-)

I just tried "dsf: -/wav24;96. It works perfectly, the device support DSD plays DSD64 and the other 2 play PCM 96/24.

I also tried "dsf:-/wav24;176/wav24;96" but it looks like the device only support up to 96/24 will only accept the 1st PCM stream and won't try the 3rd stream which caused it failed to play.

I think I will stick to dsf:-/wav24;96 which should be good enough already!

Thanks again. :-)

Lucky you.
I have a klimax, and a chromecast.
Your control points don't work with those devices.

I use Lumin app, or Teac HR streamer (which is exactly the same one), but none of them uses what the renderer publishes. Therefore I need to go back to my laptop, lauch minimwath, and change the setting when I switch from one to another :-(