MinimServer hanging after QNAP 4.3.3 Upgrade

[simoncn]

Thanks for this.

Unfortunately, it seems that this log file was produced without the Debug logging level being enabled. Please check your settings by doing the following:

1) In MinimWatch, select 'Show log' (not 'Options > Show log (watch)')
2) In the lower left corner of the log window, there is a setting for 'Logging level'. Check that this is set to Debug.
3) If the 'Logging level' property is not set to Debug, select this value in the drop-down box
4) Close the log window
5) In MinimWatch, select 'Properties' (not 'Options > Properties (watch)')
6) In the Properties window, select the System tab
7) Check the contents of the ohnet.debug field. This should be set to Default+Network.
8) If the ohnet.debug field is not set to Default+Network, type this value into the field and click the OK button

Many thanks.