Minimwatch- not seeing Minimserver.

[antonmb]

I'm not a Qnap user, but I think the 104.57.141.71 address is most likely your Qnap address for external access over the Internet. The subnet, 192.168.1.0, is your local network and represents the group of IP addresses used by your router for assigning addresses to your local network, it's not a specific device address. So your router is probably 192.168.1.1, and it is assigning an address with a higher number to your Qnap, for example 192.168.1.2, .3, etc. You can use an app like IP Scanner Home on your Mac to list the addresses of all your devices.

I'm not sure where in Properties you're entering an IP address, I've never had to do that. Typically Minimwatch finds Minimserver automatically if they're on the same network. In the System tab of Properties you should see fields for http.port and ohnet.port. I'm not sure if this is standard, but on mine those are 9790 and 9791. Other than that, I see no place to enter an IP address. If you're able to access the Properties, then it looks like Minimwatch has found Minimserver and you shouldn't have to enter an IP address anywhere.