Post Reply 
cannot see/select network drive locations on initial install of Minimserver
22-11-2015, 23:20
Post: #5
RE: cannot see/select network drive locations on initial install of Minimserver
(22-11-2015 23:08)simoncn Wrote:  
(22-11-2015 17:32)GrahamK Wrote:  the NAS drive is displayed in the 'shared' section of the Finder window, together with my other network devices such as the printer. it is listed three times as the NAS drive supports AFP, CIFS and FTP protocols. the dialogue window for Logitech Media Server, Asset UPnP and Linn Kazoo server, shows my music library folder as a location under /Volumes (with LMS i can even select the NAS directly from the sidebar in the finder window).

since my original post, i have identified the correct path as /Volumes/Music/Library and inserted this manually in the ContentDir field of the server tab. Minim seems to have accepted this and appears to have waded through the library but is not showing yet as an available server on the control point (Bubble DSnext). The minim icon is yellow and says it's starting (3.5 hours so far....) all other servers are available. i have just over 29500 tracks in my library. should it take this long to start?

I was able to make this work by double-clicking the shared library folder in Finder before opening the MinimServer dialog to select the content directory. By doing things in this order, the library folder was visible under Volumes.

It is not recommended to use MinimServer to access a library on a network share because of the very considerable performance overhead that this creates. Having the library on either a local disk or a USB-attached drive is fine. As you have a ReadyNAS Duo v2, the simplest solution is to install and run MinimServer on the NAS and control it from your Mac using MinimWatch.

OK. Thanks for your help. Minim is working fine now. Reason I chose not to install on NAS is the processor is so rubbish that a native install of LMS barely operates - as soon as you try any kind of search it crashes. Was advised by developer to move the server to a dedicated pc/Mac. Took his advice and it's performing miles better
Would Minim suffer similarly or is it less resource intensive?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: cannot see/select network drive locations on initial install of Minimserver - GrahamK - 22-11-2015 23:20

Forum Jump:


User(s) browsing this thread: 1 Guest(s)