Denon AVR X-1000 and the Pause command

[MarmiteSandwich]

Quote:Please produce a debug log by doing the following:

1) In the log window, set the logging level to Debug
2) Leave the log window open
3) Press pause and resume a few times at 15-second intervals until the problem occurs for the first time
4) Note the exact time (by looking at the timestamps in the log window) that you pressed pause and the renderer didn't pause
5) In the log window, click 'Save as' to save a log file
6) Zip the log file and attach it to a post here, together with the time that you noted in step 4
7) In the log window, set the logging level back to Info

I will look at the log and let you know what I find.

OK, done. This test confirmed something I noticed before - it seems to be always the first pause on the second track which fails. It was at 10.57.11 (or maybe 10.57.32 - the log panel updates in bursts, so it was difficult to know where it was when the fail happened). I stopped the play within a few seconds of the failed pause, which is where the log ends.
Marmite