Transcoding down
|
06-03-2015, 12:50
Post: #21
|
|||
|
|||
RE: Transcoding down
(06-03-2015 12:40)Pastim Wrote: Strange. That doesn't work on the Marantz. Playing a 24/96 track: Which control point are you using? If it is BubbleUPnP, do you have strict MIME-type checking enabled? |
|||
06-03-2015, 13:27
Post: #22
|
|||
|
|||
RE: Transcoding down
(06-03-2015 12:50)simoncn Wrote:I'm using upplay, a fairly basic linux CP that has very few options.(06-03-2015 12:40)Pastim Wrote: Strange. That doesn't work on the Marantz. Playing a 24/96 track: I tried using the Marantz's own controls and indeed it does work with the Lnn wavnn mix. I then tried bubbleunp (android). The mime-type check is not on, but it didn't work. Odd. |
|||
06-03-2015, 14:30
(This post was last modified: 06-03-2015 14:31 by sedest.)
Post: #23
|
|||
|
|||
RE: Transcoding down
(06-03-2015 12:28)simoncn Wrote:(06-03-2015 11:17)sedest Wrote: Since latest update (ministreamer-0.5.8), I can no longer transcode dsf to dopwav. My DAC is DoP capable only (Matrix X-Sabre - does not support native DSD). Since latest update, when I try to stream DSF converted to DoP Wave on-the-fly, the DAC does not engage DSD mode (I am using "dsf:dopwav" flag). I hear a very high pitch and constant noise through my speakers. Anyway, I can perfectly stream previously encoded DoP content on FLAC files (assembled with Lumin DSD modified foobar component). By the way, on-the-fly transcode to DoP worked like a charm before the update. |
|||
06-03-2015, 16:58
Post: #24
|
|||
|
|||
RE: Transcoding down
(06-03-2015 14:30)sedest Wrote: My DAC is DoP capable only (Matrix X-Sabre - does not support native DSD). Since latest update, when I try to stream DSF converted to DoP Wave on-the-fly, the DAC does not engage DSD mode (I am using "dsf:dopwav" flag). I hear a very high pitch and constant noise through my speakers. Anyway, I can perfectly stream previously encoded DoP content on FLAC files (assembled with Lumin DSD modified foobar component). Thanks for this information. I have found the cause of the problem and a fix should be available soon. |
|||
06-03-2015, 17:25
Post: #25
|
|||
|
|||
RE: Transcoding down | |||
06-03-2015, 17:35
Post: #26
|
|||
|
|||
RE: Transcoding down
(06-03-2015 17:25)simoncn Wrote:Unfortunately that's not practical. The room with the Marantz has very weak wifi (to even test with bubbleupnp I had to go to another room).(06-03-2015 13:27)Pastim Wrote: I then tried bubbleunp (android). The mime-type check is not on, but it didn't work. So I use upplay on my linux desktop instead. I have no idea at all why L24;192/L16;96 works, but L24;192/wav24;96 doesn't, but then I don't understand the relationship between the renderer, CP and server well enough. It isn't critical, but is strange. |
|||
06-03-2015, 18:52
(This post was last modified: 06-03-2015 19:32 by beckphotonik.)
Post: #27
|
|||
|
|||
RE: Transcoding down
For the record, dsf:dopwav has stopped working for me too. All I get is a noise reminiscent of the lead in to a worn vinyl. I have a separate but possibly connected issue in that the control point response is virtually non existent. After selecting the first track I have to resort to the streamer remote to do anything more. This has all happened since the last round of updates.
NAS is a Qnap hs251, streamer chord dsx1000 control point is either iPad or nexus7 running the chord hd app. Bubble UPnP on the nexus is just usable but still very slow to detect both the streamer and MinimServer. Is there a way I can roll back to MinimServer update 59 and minimstreamer 0.5.4 as they worked fine. Melco N1ZH/2 (updated to EX) MinimServer2, Chord M Scaler, DAVE, SPM1200MKII, Wilson Benesch Vectors |
|||
06-03-2015, 19:44
Post: #28
|
|||
|
|||
RE: Transcoding down
(06-03-2015 18:52)beckphotonik Wrote: For the record, dsf:dopwav has stopped working for me too. All I get is a noise reminiscent of the lead in to a worn vinyl. I have a separate but possibly connected issue in that the control point response is virtually non existent. After selecting the first track I have to resort to the streamer remote to do anything more. This has all happened since the last round of updates. Sorry for the inconvenience. I am about to release MinimStreamer 0.5.9 with a fix for this problem (should be in the next few minutes). |
|||
06-03-2015, 19:55
(This post was last modified: 06-03-2015 19:56 by simoncn.)
Post: #29
|
|||
|
|||
RE: Transcoding down | |||
06-03-2015, 20:16
Post: #30
|
|||
|
|||
RE: Transcoding down
(06-03-2015 19:55)simoncn Wrote:(06-03-2015 19:44)simoncn Wrote: Sorry for the inconvenience. I am about to release MinimStreamer 0.5.9 with a fix for this problem (should be in the next few minutes). Ahh bliss! Everything appears to be back to normal. Thank you Simon. Melco N1ZH/2 (updated to EX) MinimServer2, Chord M Scaler, DAVE, SPM1200MKII, Wilson Benesch Vectors |
|||
« Next Oldest | Next Newest »
|
User(s) browsing this thread: 1 Guest(s)