MinimServer Forum
MinimServer not working after formatting hard drive - Printable Version

+- MinimServer Forum (https://forum.minimserver.com)
+-- Forum: MinimServer (/forumdisplay.php?fid=1)
+--- Forum: Support (/forumdisplay.php?fid=4)
+--- Thread: MinimServer not working after formatting hard drive (/showthread.php?tid=5496)



MinimServer not working after formatting hard drive - Desmal - 07-01-2020 18:16

I ran into a situation where I had to format the hard drives in Melco N1A. I installed new music and MinimServer. I see the Melco friendly name in the network, but can't open the music. I tried opening MinimServer with MinimWatch, but get nothing.

Thanks in advance


RE: MinimServer not working after formatting hard drive - simoncn - 10-01-2020 09:12

This is usually caused by not moving the USB stick from the backup port to the expansion port when you installed MinimServer (see step 9 of this section).

To check this, power off the Melco, insert the USB stick in the expansion port and power on the Melco. This should install MinimServer.