MinimServer Forum
RopieeXL on pi + MinimServer trancoding? - Printable Version

+- MinimServer Forum (https://forum.minimserver.com)
+-- Forum: MinimServer (/forumdisplay.php?fid=1)
+--- Forum: Support (/forumdisplay.php?fid=4)
+--- Thread: RopieeXL on pi + MinimServer trancoding? (/showthread.php?tid=5379)



RopieeXL on pi + MinimServer trancoding? - aliasname - 12-09-2019 14:49

I recently swapped my Ropiee (roon endpoint software for the pi) in preference of RopieeXL which turns the pi not only acting as a roon endpoint but also dlna/upnp.

Works ok as long as I do select tracks from within Minim being of 16/44.1
Everything above results in distorted sound, likely asking for a transcoding?
But I'm lost somehow. Tried a couple of things the past days ... no way.

Setup: MinimServer on a Syno, Pi with Kali reclocker and Allo piano 2.1 DAC.

Any idea where to look next?


RE: RopieeXL on pi + MinimServer trancoding? - simoncn - 12-09-2019 19:49

It sounds like RopieeXL cannot handle UPnP/DLNA audio streamed at a higher resolution than 16/44.1. This is not a Minimserver issue.


RE: RopieeXL on pi + MinimServer trancoding? - aliasname - 13-09-2019 05:37

(12-09-2019 19:49)simoncn Wrote:  It sounds like RopieeXL cannot handle UPnP/DLNA audio streamed at a higher resolution than 16/44.1.

Likely, have to get back to the author .... since yes *:wav16;44 works ok.

Update: solved ... Simon you were right .. a slightly modified config on RopieeXL solved the trick.