MinimServer Forum
MinimWatch does not see MinimServer - Printable Version

+- MinimServer Forum (https://forum.minimserver.com)
+-- Forum: MinimServer (/forumdisplay.php?fid=1)
+--- Forum: Support (/forumdisplay.php?fid=4)
+--- Thread: MinimWatch does not see MinimServer (/showthread.php?tid=5283)



MinimWatch does not see MinimServer - SNQN - 16-05-2019 16:55

I have got a new broadband router and now MinimWatch no longer can see Minim Server. The log shows this:
"Retrying monitor subscription for server at 192.168.0.100:9791 (attempt 1)" - and so on.
MinimWatch is running on a Windows 10 PC and MinimServer on a QNAP HS-251. IP address for the QNAP is unchanged - and correct.
But I wondered about the ":9791", because in your troubleshooting guide guide you say " http://x.x.x.x:9790"


RE: MinimWatch does not see MinimServer - simoncn - 16-05-2019 17:04

The 9790 port number is for HTTP. The problem you are seeing is with UPnP communications, which use port 9791. The problem is caused by a firewall on the machine running MinimWatch (your Windows 10 PC) that is blocking inbound connections from MinimServer. For detailed instructions on how to fix this, see this post.


RE: MinimWatch does not see MinimServer - SNQN - 16-05-2019 17:13

(16-05-2019 17:04)simoncn Wrote:  The 9790 port number is for HTTP. The problem you are seeing is with UPnP communications, which use port 9791. The problem is caused by a firewall on the machine running MinimWatch (your Windows 10 PC) that is blocking inbound connections from MinimServer. For detailed instructions on how to fix this, see this post.

For some reason my network had changed to "public" during the change of router. When set to private MinimWatch immediately turned green Smile
Thank you very much!