+- MinimServer Forum (https://forum.minimserver.com)
+-- Forum: MinimServer (/forumdisplay.php?fid=1)
+--- Forum: Support (/forumdisplay.php?fid=4)
+--- Thread: MinimWatch cannot see MinimServer (/showthread.php?tid=4211)
MinimWatch cannot see MinimServer - v4vfr - 28-10-2017 17:32
Hello,
I need help to configure my system (Windows 10 PC), because MinimWatch (on the PC) cannot see my MinimServer.
I installed the MinimServer on my Synology NAS. From Synology Control Panel I have the following listed:
IP Address: 192.168.2.32
Subnet Mask: 255.255.255.0
From MinimWatch Log:
12:10:56.084 main: OhNetService: using UPnP port 9791
Using single subnet 192.168.2.0
When I check the status of my MinimServer, I have noticed that it connects at http://192.168.2.32:9790/ not 9791.
MinimServer is running OK, I can connect to it from my Wi-Fi speaker. However, I cannot configure it from MinimWatch.
Any help would be much appreciated.
Cheers,
Levi
RE: MinimWatch cannot see MinimServer - simoncn - 28-10-2017 20:24
See this section (MinimWatch can't find MinimServer) for advice on how to solve this. The 9790 vs 9791 is normal. You have established that MinimServer is running, so you should check the suggestions in the last two paragraphs.