+- MinimServer Forum (https://forum.minimserver.com)
+-- Forum: MinimServer (/forumdisplay.php?fid=1)
+--- Forum: General (/forumdisplay.php?fid=2)
+--- Thread: installing minimserver on netgear R7000 router flashed with advanced tomato firmware (/showthread.php?tid=3958)
Pages: 1 2
installing minimserver on netgear R7000 router flashed with advanced tomato firmware - dafart - 04-04-2017 15:35
Dear all, I'd really like to have my router run minimserver..
I've spend several day trying to get java installed but to no avail.
I have a limited linux experience..
The firmware runs this kernel: Linux Tomato 2.6.36.4brcmarm #2 SMP PREEMPT Mon Dec 5 07:41:30 CET 2016 armv7l GNU/Linux
I tried the following versions of java:
ejdk-8u121-linux-armv6-vfp-hflt.tar.gz
jdk-8u121-linux-arm32-vfp-hflt.tar.gz
jdk-8u121-linux-arm64-vfp-hflt.tar.gz
ejre-7u71-fcs-b14-linux-arm-vfp-hflt-client_headless-26_sep_2014.tar.gz
jdk-7u60-linux-arm-vfp-hflt.tar.gz
But with none of them it was possible to run "java -v", (I always got the "java not found error..)
I guess this has to do with my PATH settings but I have no idea how to solve this..
Is there someone who can point me to the right direction?
I have an USB stick with entware installed and I have created a build environment using entware..
Also I tried to follow the examples given in this post: https://forum.minimserver.com/showthread.php?tid=1361&highlight=openwrt but like I said I'm stuck with the java executable not being found..
My /opt/etc/profile file loks like this:
Code:
#!/bin/sh
# Please note it's not a system-wide settings, it's only for a current
# terminal session. Point your f\w (if necessery) to execute /opt/etc/profile
# at console logon.
export PATH=/opt/bin:/opt/sbin:$PATH
export TERMINFO=/opt/share/terminfo
export TERM=xterm
export TMP=/opt/tmp
export TEMP=/opt/tmp
alias mc="mc -c"
# You may define localization
#export LANG='ru_RU.UTF-8'
#export LC_ALL='ru_RU.UTF-8'
export LANG='en_US.UTF-8'
export LC_ALL='en_US.UTF-8'And my /etc/profile file looks like this:
Code:
xport PATH="/bin:/usr/bin:/sbin:/usr/sbin:/home/$USER:/mmc/sbin:/mmc/bin:/mmc/usr/sbin:/mmc/usr/bin:/opt/sbin:/opt/bin:/opt/usr/sbin:/opt/usr/bin:`nvram get env_path`"
export PS1='\u@\h:\w\$ '
alias l='ls -lFA'
alias ll='ls -lF'
ldd() {
LD_TRACE_LOADED_OBJECTS=1 $*;
}
[ -f /jffs/etc/profile ] && . /jffs/etc/profile
[ -f /opt/etc/profile ] && . /opt/etc/profileDaf
RE: installing minimserver on netgear R7000 router flashed with advanced tomato firmware - simoncn - 04-04-2017 16:36
Where did you install Java? You can run it directly from the install location by using a command such as
/my/java/install/location/bin/java -version
Note that -v is not a valid option for the java command.
RE: installing minimserver on netgear R7000 router flashed with advanced tomato firmware - dafart - 04-04-2017 17:13
Hi there Simon, thanks for taking time to reply and also thanks for the development of this great upnp server!
I did not really install java, I made a folder /opt/java and put the different tarballs there and upacked them there and tried to run the binaries from there..
(so there's a folder /opt/java/jdk1.8.0_121/bin that contains the java binary..)
But maybe that's not the way it should be?
Greetings,
Daf
RE: installing minimserver on netgear R7000 router flashed with advanced tomato firmware - dafart - 05-04-2017 08:54
This router has the broadcom BCM4709 chip..
I have no idea how to figure out which version of embedded java I should download to get started and whether or not it will run..
None of my attempted so far have been succesfull.
Anyone any ideas?
RE: installing minimserver on netgear R7000 - simoncn - 05-04-2017 09:08
(05-04-2017 08:54)dafart Wrote: This router has the broadcom BCM4709 chip..
I have no idea how to figure out which version of embedded java I should download to get started and whether or not it will run..
None of my attempted so far have been succesfull.
Anyone any ideas?
According to the Broadcom spec, this is an ARMv7 chip. The embedded Linux system might be soft-float or hard-float. You could try ejdk-8u121-linux-arm-sflt.tar.gz (for soft-float) or jdk-8u121-linux-arm32-vfp-hflt.tar.gz (for hard-float). If nether of these works, please post the error messages that you are getting when you run the 'java -version' command.
RE: installing minimserver on netgear R7000 router flashed with advanced tomato firmware - dafart - 05-04-2017 10:02
for both ejdk1.8.0_121/linux_arm_sflt/jre/ and jdk1.8.0_121/jre/ (from jdk-8u121-linux-arm32-vfp-hflt.tar.gz) I get the same error:
-sh: java: not found
nothing more.
echo $PATH
/opt/java/jre/bin:/opt/bin:/opt/sbin:/bin:/usr/bin:/sbin:/usr/sbin:/home/root:/mmc/sbin:/mmc/bin:/mmc/usr/sbin:/mmc/usr/bin:/opt/sbin:/opt/bin:/opt/usr/sbin:/opt/usr/bin:
RE: installing minimserver on netgear R7000 router flashed with advanced tomato firmware - simoncn - 05-04-2017 12:21
You should try running java from the directory where it is installed. For you, I think this is
/opt/java/jdk1.8.0_121/bin/java -version
By doing this, you will establish which is the correct version of Java for your system. After this, we can resolve the PATH problem.
RE: installing minimserver on netgear R7000 router flashed with advanced tomato firmware - dafart - 05-04-2017 12:41
Sorry I forgot to mention I already tried that as well,
For both hard-float and soft float I get the same error:
/opt/java/jdk1.8.0_121/bin/java -version
-sh: /opt/java/jdk1.8.0_121/bin/java: not found
Could this mean none of the packages are correct? Or has this to do with my setup?
RE: installing minimserver on netgear R7000 - simoncn - 05-04-2017 13:11
Have you verified that the /opt/java/jdk1.8.0_121/bin/java file exists?
If so, this message can mean that there has been a problem loading shared libraries required by the java executable. You can use the command
ldd -v /opt/java/jdk1.8.0_121/bin/java
to get more information about this. Please post the output from this command here.
RE: installing minimserver on netgear R7000 router flashed with advanced tomato firmware - dafart - 05-04-2017 14:04
I do have ldd installed, however I'm not sure it works correctly, because ldd --version gives me "--version not found"
root@Tomato:/tmp/home/root# ldd -v /opt/java/jdk1.8.0_121/bin/java
-sh: -v: not found
root@Tomato:/tmp/home/root# ldd /opt/java/jdk1.8.0_121/bin/java
-sh: /opt/java/jdk1.8.0_121/bin/java: not found