Degraded Mode QNap - Minim not working - Printable Version +- MinimServer Forum (https://forum.minimserver.com) +-- Forum: MinimServer (/forumdisplay.php?fid=1) +--- Forum: Support (/forumdisplay.php?fid=4) +--- Thread: Degraded Mode QNap - Minim not working (/showthread.php?tid=2051) Pages: 1 2 |
Degraded Mode QNap - Minim not working - Stemenik - 20-12-2014 13:08 Hello to everybody. One disk decided to fail in a QNap TS419 P II. I'm now running the 4-disk RAID5 system in a 3-disk degraded mode configuration, waiting for the faulty disk to be replaced. All files are visible and available. I assumed the MinimServer to work on the system as it ever did, but I found it not to be available. In fact from the QNap OS (an older 3.8.1 version) the server showed as disabled, and enabling it didn't result in it actually enabling, a further check would show it as disabled again. Since the MinimServer was an older version 0.6, I uninstalled it and manually installed the latest 0.8.2 version. Now from the QNap OS the server looks enabled, but still it's not visible from the outside, all softwares usually "seeing" it don't seem to detect it, and the MinimWatch do not detect it either. Any suggestions? I would like the NAS' owner to use the NAS on Christmas holydays and I can't get the replacement HD before the new year's first weeks. RE: Degraded Mode QNap - Minim not working - simoncn - 20-12-2014 15:01 (20-12-2014 13:08)Stemenik Wrote: Hello to everybody. Have you checked the system log to see if there are any error messages from MinimServer? To check whether MinimServer 0.8.2 is running on the QNAP, you can open the page http://x.x.x.x:9790 in a web browser, where x.x.x.x is the IP address of the QNAP. If the web page doesn't respond, this means that MinimServer has failed to start successfully. Please post back here with the result of this test and I will advise on next steps. RE: Degraded Mode QNap - Minim not working - Stemenik - 20-12-2014 15:41 Thank you for your answer! OK I had tried opening that URL before (the QNap OS gives it as the server's own link) but it doesn't respond. Tried again just now. So yes, the MinimServer failed to start... RE: Degraded Mode QNap - Minim not working - Stemenik - 20-12-2014 15:43 By the way, while I was in my lunch time I thought I could try re-installing the Java as well - since the disk failure had corrupted the MinimServer's older version it could as well have corrupted the JRE... Would it be a good idea...? EDIT: OK while I was waiting for your reply I decided I'd reinstall the JRE anyway. I disabled the MinimServer, uninstalled the older JRE, installed the JRE_ARM 8.6.0, re-enabled the MinimServer, power-cycled the QNap. The MinimServer still doesn't seem to start RE: Degraded Mode QNap - Minim not working - simoncn - 20-12-2014 16:21 (20-12-2014 15:43)Stemenik Wrote: By the way, while I was in my lunch time I thought I could try re-installing the Java as well - since the disk failure had corrupted the MinimServer's older version it could as well have corrupted the JRE... Would it be a good idea...? Did you check the system log for error messages as I suggested in my previous post? If there are no messages in the system log, the next steps are: 1) Manually install MinimServer 0.8.3 to replace MinimServer 0.8.2 2) Reboot the NAS 3) MinimServer will fail to start but will show as started in the QNAP admin console 4) From the QNAP admin console, disable MinimServer 5) This will create a file named minimserver-diag.tar.gz on the Public share of the QNAP 6) Attach the minimserver-diag.tar.gz file to a post here The contents of the minimserver-diag.tar.gz file should enable me to find the cause of the problem. RE: Degraded Mode QNap - Minim not working - Stemenik - 20-12-2014 16:37 (20-12-2014 16:21)simoncn Wrote: Did you check the system log for error messages as I suggested in my previous post? I'm sorry I hadn't realised which system log should I look at since the server isn't working. Now I seem to have grabbed that I needed to look at the NAS' logs. I checked and there seem to be nothing. I will proceed following your instructions RE: Degraded Mode QNap - Minim not working - Stemenik - 20-12-2014 17:09 I'm back with the file, I attached it to this entry. Thank you very much for your help [attachment=679] RE: Degraded Mode QNap - Minim not working - simoncn - 20-12-2014 21:29 (20-12-2014 17:09)Stemenik Wrote: I'm back with the file, I attached it to this entry. Thanks for this. The startup error message is: A later version of package 'minimserver-0.8.2' is preinstalled This means there is something wrong with the contents of one of the following folders: /share/MD0_DATA/.qpkg/MinimServer/lib /share/MD0_DATA/.qpkg/MinimServer/libext Please run the following commands and post the output here: ls -l /share/MD0_DATA/.qpkg/MinimServer/lib ls -l /share/MD0_DATA/.qpkg/MinimServer/libext Thanks very much! RE: Degraded Mode QNap - Minim not working - Stemenik - 23-12-2014 12:53 Hi, I'm very sorry for the delay but my Internet connection was lost for 3 days. I attached the output of the commands you suggested. I hope I did it right and that it makes sense for you. By the way the second command didn't give any output, as you will see from the attached documents. [attachment=685] [attachment=686] RE: Degraded Mode QNap - Minim not working - simoncn - 23-12-2014 13:14 (23-12-2014 12:53)Stemenik Wrote: Hi, I'm very sorry for the delay but my Internet connection was lost for 3 days. Somehow you have managed to install both MinimServer 0.8.2 and MinimServer 0.8.3 in the /share/MD0_DATA/.qpkg/MinimServer/lib directory. This shouldn't be possible and I don't know how it happened. To fix this, run the following command: rm -f /share/MD0_DATA/.qpkg/MinimServer/lib/* and then reinstall MinimServer 0.8.3. |