MinimServeur under Linux visible from a Windows environment but not detected by IOS

MinimServeur under Linux visible from a Windows environment but not detected by IOS - Printable Version

+- MinimServer Forum (https://forum.minimserver.com)
+-- Forum: MinimServer (/forumdisplay.php?fid=1)
+--- Forum: Support (/forumdisplay.php?fid=4)
+--- Thread: MinimServeur under Linux visible from a Windows environment but not detected by IOS (/showthread.php?tid=7427)

Pages: 1 2

RE: MinimServeur under Linux visible from a Windows environment but not detected by IOS - cpaslui - 09-01-2025 08:18

Hello

After spending a good part of the night to go point by point the wired network, Wifi, bands frequencies whether it is Wifi6E, 5Ghz band and 2.4 Ghz no improvement,
I took the GentooPplayer menus and in Restart Services I restarted all the services and each time do a search by Mconnect of MinimServer

of which Restart Services dhcpcd

and Oh Miracle! , appeared the green icon long awaited but that In Mconnect not in Jplay!!!!!

[Image: Minim-Server-d-tect-par-Mconnect.jpg]

RE: MinimServeur under Linux - simoncn - 09-01-2025 13:03

As you are able to see MinimServer some of the time from some control points but not all of the time from all control points, it sounds like there is a UPnP discovery problem with your network. Please see this page for more information about how you can fix this.

As you have tried some of the suggestions on this page already, I suggest you look at your router configuration setting for IGMP snooping. What make and model of router are you using?

RE: MinimServeur under Linux visible from a Windows environment but not detected by IOS - cpaslui - 09-01-2025 16:13

(09-01-2025 13:03)simoncn Wrote: As you are able to see MinimServer some of the time from some control points but not all of the time from all control points, it sounds like there is a UPnP discovery problem with your network. Please see this page for more information about how you can fix this.

As you have tried some of the suggestions on this page already, I suggest you look at your router configuration setting for IGMP snooping. What make and model of router are you using?

I am with ISP Bouygues Telecom and c is a Router provided by this ISP

I am connected to the Fibre and RJ45 to the relevant devices

by cons the router is connected in RJ45 to a Switch Audiophile brand HNE which itself is connected to a Network Filter acoustic Eno 2 and himself linked to a Network card JCAT netcard XE of the server Gentooplayer where MinimServer is installed

that I pass live from the router to the server where by the Switch and the filter the problem has the same area of being

RE: MinimServeur under Linux visible from a Windows environment but not detected by IOS - stefano_mbp - 09-01-2025 16:15

Try to “simplify” your connections first … remove the filter and see it it works

RE: MinimServeur under Linux visible from a Windows environment but not detected by IOS - cpaslui - 10-01-2025 08:11

hello

I took over the complete installation of Gentooplayer and connected directly to the router, the server

since my IPAD Mconnect recognized it at the end of the second time

in JPLAY IOS it took me to launch several search so that finally he finds it

once found , I reconnected my Switch and network filter and it works

This is the architecture of my installation

and the router description