Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
MinimWatch does not see MinimServer
16-05-2019, 16:55
Post: #1
MinimWatch does not see MinimServer
I have got a new broadband router and now MinimWatch no longer can see Minim Server. The log shows this:
"Retrying monitor subscription for server at 192.168.0.100:9791 (attempt 1)" - and so on.
MinimWatch is running on a Windows 10 PC and MinimServer on a QNAP HS-251. IP address for the QNAP is unchanged - and correct.
But I wondered about the ":9791", because in your troubleshooting guide guide you say " http://x.x.x.x:9790"
Find all posts by this user
Quote this message in a reply
16-05-2019, 17:04 (This post was last modified: 27-10-2019 20:38 by simoncn.)
Post: #2
RE: MinimWatch does not see MinimServer
The 9790 port number is for HTTP. The problem you are seeing is with UPnP communications, which use port 9791. The problem is caused by a firewall on the machine running MinimWatch (your Windows 10 PC) that is blocking inbound connections from MinimServer. For detailed instructions on how to fix this, see this post.
Find all posts by this user
Quote this message in a reply
16-05-2019, 17:13
Post: #3
RE: MinimWatch does not see MinimServer
(16-05-2019 17:04)simoncn Wrote:  The 9790 port number is for HTTP. The problem you are seeing is with UPnP communications, which use port 9791. The problem is caused by a firewall on the machine running MinimWatch (your Windows 10 PC) that is blocking inbound connections from MinimServer. For detailed instructions on how to fix this, see this post.

For some reason my network had changed to "public" during the change of router. When set to private MinimWatch immediately turned green Smile
Thank you very much!
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)