Post Reply 
 
Thread Rating:
  • 1 Votes - 3 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Melco Audiophile NAS
23-12-2018, 11:15
Post: #531
RE: Melco Audiophile NAS
Some similar issues with Melco Firmware 3.9. My N1 defaulted to Direct player connection with no IP address. When this was changed to Nework the setting was DCHP not the Fixed IP address I always use - luckily the IP DNS addresses were there just not selected. Two restarts and I was up and running. However, I use my Melco to feed two systems one with MinimServer and one with Audirvana. Once I tried the nobody/nobody p/w for SMB file sharing on my Mac I could mount the library for Audirvana which then needed a new password for EVERY TRACK played. In the end I had to delete the library and recatalogue. To keep my Audirvana playlists I had to rewrite the rules for every smart playlist and export the fixed playlists and reimport them - half a day's work because of unwanted p/w protection. MinimServer has been working fine with the new Melco App and my Devialet in the main system.

Has anyone seen anything about this direct wired connection for iPad or Tablet with the Melco directly connected? I can only guess this would be a USB connection to the Melco and an Ethernet direct connection to the amp/DAC.

David
Find all posts by this user
Quote this message in a reply
23-12-2018, 12:09
Post: #532
RE: Melco Audiophile NAS
Why not just put 3.8 back until the dust settles after Christmas?
Yes, you will have to reinstall Minimserver, but not the end of the world.

Donuk sunny downtown York
Find all posts by this user
Quote this message in a reply
27-12-2018, 16:46
Post: #533
RE: Melco Audiophile NAS
Just found another problem with v3.9. My N1ZH/2 will not play any more than 16min 54sec of a DXD track over USB. All is fine using AirPlay I have not (yet) found a limitation on other formats.
Find all posts by this user
Quote this message in a reply
27-12-2018, 19:13
Post: #534
RE: Melco Audiophile NAS
This playing time is equivalent to 2 GB of data at 24/352800. For a WAV file, the playing limit should be 4 GB of data, not 2 GB. It sounds like the Melco USB-DAC renderer (or perhaps your control point) has a bug that limits it to a WAV file length of 2 GB. See this thread for a similar problem with a different renderer.
Find all posts by this user
Quote this message in a reply
27-12-2018, 19:38
Post: #535
RE: Melco Audiophile NAS
(27-12-2018 19:13)simoncn Wrote:  This playing time is equivalent to 2 GB of data at 24/352800. For a WAV file, the playing limit should be 4 GB of data, not 2 GB. It sounds like the Melco USB-DAC renderer (or perhaps your control point) has a bug that limits it to a WAV file length of 2 GB. See this thread for a similar problem with a different renderer.

Simon,
I recognise the file size etc. and have been in contact with Alan at Melco. The problem surfaced with firmware v3.9 as the control point (Melco iOS app) and renderer (Chord M Scaler/DAVE) have not changed since v3.8 and all worked fine then.
Find all posts by this user
Quote this message in a reply
05-01-2019, 17:35 (This post was last modified: 05-01-2019 17:39 by GreenMtnGringo.)
Post: #536
RE: Melco Audiophile NAS
Ever since installing Melco firmware v3.90, Audirvana Plus 3 has not worked correctly on my MacBook Pro (High Sierra 10.13.6). When running Audirvana, I get pop-up prompts constantly asking me to enter my name and password for the server N1-10BC (see attached screen shot). I select "Registered User," enter "nobody" (without the quotation marks) in the Name and Password fields, check the box for "Remember this password in my keychain" and then click Connect ... only to have to do it all over again, and again....

Is there a fix or workaround for this issue currently? Alternatively, does anyone know if there is a fix in the works?

Thanks.


Attached File(s) Thumbnail(s)
   

Melco HA-N1ZH60 Mk. 1 -> USB -> Matrix X-SPDIF 2 -> I2S -> PS Audio DirectStream Sr. -> XLR -> Mark Levinson No. 326S -> RCA -> JL Audio E-Sub e110 (active crossover @ 100 Hz) -> RCA -> Bryston 4B3 -> Magnepan .7
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 3 Guest(s)